HP-UX Overview and Command Summary - page 10

Command Script to print useful information to a file called info
echo "sel path system; info; wait; infolog
>view
>done
>"lcstm>info
#cat info

print_manifest  (located in /var/opt/ignite/local/manifest/manifestinfo ??)

Command Script to print useful information
cstm
cstm>Map
cstm>SelAll
cstm>Information
cstm>Infolog
cstm>exit

Command Script to print useful information  (not sure this is complete/correct)
cstm
cstm>SelClass type "Disk" qualifier "All"
cstm>info;wait
cstm>il
cstm>create /tmp/disk.stm
cstm>done
cstm>quit
cstm>ok

cstm -f /tmp/disk.stm

Terminal Environment

TERM - environmental variable indicating type of terminal
stty
termio

/usr/share/lib/terminfo

setup string for xterm:  /usr/bin/X11 -ls -d @D

$DISPLAY=192.168.70.80:0.0

$TERM = xterm

stty
stty -all

Running Exceed  --> xstart

• Rightl Click  --> Huge

Page 11
Page 9

Find HP-UX Overview and Command Summary All pages 

Page 12    |||    Page 11    |||   Page 10   |||   Page 9   |||

Page 8      |||    Page 7      |||   Page 6     |||   Page 5   |||

Page 4      |||    Page 3      |||   Page 2     |||    Page 1  |||

HP-UX Overview and Command Summary - page 9

Changing the Server Name and the IP Address

• Using set_parms  --> may not work correctly for multiple nics
• set_parms hostname  ( a reboot is required for the change to take effect)
• It will prompt you for the new hostname
• It will prompt you to reboot (answer no if you are also changing the ip address)
• set_parms ip_address   ( a reboot is required for the change to take effect)
• It will prompt you for the new ip address
• It will prompt you to reboot
• Manually makiing the change:
• vi /etc/hosts
• vi /etc/rc.config.d/netconf   <-- ** Make sure that no extra files are in the /etc/rc.config.d directory - it gets sourced on bootup
• reboot
• Other files that may need to checked/changed
• /etc/resolv.conf
• /etc/nsswitch.conf

System Tuning

Extract Current System File

• cd /stand/build
• /usr/lbin/sysadm/system_prep -s /stand/build/system
• file is called system
• section called "Tunable Parameters"

kmtune - displays the tunable parameters
kmtune -l  <-- This displays a detailed report of the parameters (current, planned, default, minimum, etc)
sam allows you to tune the kernel
Manual Kernel Build (not using sam)  -->  /usr/sbin/mk_kernel -s /stand /build/system

STM

diaglogd

/var/opt/resmon/log

Procedure to use STM to determine memory configuration

• Type stm at the command line
• Type o to select ok
• Press the down arrow in the displayed map and select memory by hitting the space bar
• Press tab to go to menus and arrow over to Tools and hit enter
• Select Information -> and hit enter
• Select Information Log and hit enter
• Information Tool Log for Memory will be displayed
• To print either select Print or SaveAs (to save the log to file for later printing)

Page 10
Page 8

Find HP-UX Overview and Command Summary All pages 

Page 12    |||    Page 11    |||   Page 10   |||   Page 9   |||

Page 8      |||    Page 7      |||   Page 6     |||   Page 5   |||

Page 4      |||    Page 3      |||   Page 2     |||    Page 1  |||

HP-UX Overview and Command Summary - page 8

System Information

Note:  See section on STM, detailed system information is available with this utility
           Also SAM -->Performance Monitors --> System Properties

OS Information

uname -a - display general information e.g. OS release, node name, machine ID number, etc 

print $(uname -i)16op|dc  hex system id
/opt/itor/bin/i4target -v     spu

file /stand/vmunix   <-- shows whether 64 bit or 32 bit kernel
getconf KERNEL_BITS  <--shows whether 64 bit or 32 bit kernel

Memory Information
dmesg|grep Phy  <-- List amount of physical ram in server
cat syslog|grep Phy <-- List amount of physical ram in server
echo phys_mem_pages/D|adb -k /stand/vmunix /dev/kmem   <-- Lists amount of  4K Memory pages in HPUX 11.x
echo "memory_installed_in_machine/D" | adb -k /stand/vmunix /dev/mem |tail -1 | awk '$2 > 0 { print $2 / 256 }'  <--  Lists memory in MB.
echo "physmem/D" | adb /stand/vmunix /dev/kmem  <-- Lists amount of 4K Memory pages in HPUX 10.x

model   <-- information about the model of the workstation/server

sam --> Performance Monitors --> System Properties  --> Memory Tab

CPU Information

ioscan -fnC processor   <-- shows information about each processor found

echo "itick_per_usec/D" | adb -k /stand/vmunix /dev/mem | tail -1  <-- Shows CPU Speed in MHZ

sam --> Performance Monitors --> System Properties  -->Processor Tab

echo itick_per_tick/D | adb /stand/vmunix /dev/kmem - gives processor speed 

grep model /usr/lib/sched.models - gives type of processor for 10.X systems 

grep model /opt/langtools/lib/sched.models - gives processor type for 11.X systems 



Page 9
Page 7

Find HP-UX Overview and Command Summary All pages 

Page 12    |||    Page 11    |||   Page 10   |||   Page 9   |||

Page 8      |||    Page 7      |||   Page 6     |||   Page 5   |||

Page 4      |||    Page 3      |||   Page 2     |||    Page 1  |||