16. What are sites? What are they used for?

16. What are sites? What are they used for?

December 24, 2010
Windows admin interview questions (includes Vista)


Sites in Active Directory represent the physical structure, or topology, of your network. Active Directory uses topology information, stored as site and site link objects in the directory, to build the most efficient replication topology. You use Active Directory Sites and Services to define sites and site links. A site is a set of well-connected subnets. Sites differ from domains; sites represent the physical structure of your network, while domains represent the logical structure of your organization.
Read More: http://technet.microsoft.com/en-us/library/cc782048%28WS.10%29.aspx
15. What is LDP? What is REPLMON? What is ADSIEDIT? What is NETDOM? What is REPADMIN?

15. What is LDP? What is REPLMON? What is ADSIEDIT? What is NETDOM? What is REPADMIN?

December 24, 2010
Windows admin interview questions (includes Vista)


The Lightweight Directory Access Protocol, or LDAP is an application protocol for querying and modifying directory services running over TCP/IP.[1]
A directory is a set of objects with attributes organized in a logical and hierarchical manner. The most common example is the telephone directory, which consists of a series of names (either of persons or organizations) organized alphabetically, with each name having an address and phone number attached.


An LDAP directory tree often reflects various political, geographic, and/or organizational boundaries, depending on the model chosen. LDAP deployments today tend to use Domain name system (DNS) names for structuring the topmost levels of the hierarchy. Deeper inside the directory might appear entries representing people, organizational units, printers, documents, groups of people or anything else that represents a given tree entry (or multiple entries).
Its current version is LDAPv3, which is specified in a series of Internet Engineering Task Force (IETF) Standard Track Requests for comments (RFCs) as detailed in RFC 4510.
LDAP means Light-Weight Directory Access Protocol. It determines how an object in an Active directory should be named. LDAP (Lightweight Directory Access Protocol) is a proposed open standard for accessing global or local directory services over a network and/or the Internet. A directory, in this sense, is very much like a phone book. LDAP can handle other information, but at present it is typically used to associate names with phone numbers and email addresses. LDAP directories are designed to support a high volume of queries, but the data stored in the directory does not change very often. It works on port no. 389. LDAP is sometimes known as X.500 Lite. X.500 is an international standard for directories and full-featured, but it is also complex, requiring a lot of computing resources and the full OSI stack. LDAP, in contrast, can run easily on a PC and over TCP/IP. LDAP can access X.500 directories but does not support every capability of X.500
What is REPLMON?

A: Replmon is the first tool you should use when troubleshooting Active Directory replication issues. As it is a graphical tool, replication issues are easy to see and somewhat easier to diagnose than using its command line counterparts. The purpose of this document is to guide you in how to use it, list some common replication errors and show some examples of when replication issues can stop other network installation actions.

for more go to http://www.techtutorials.net/articles/replmon_howto_a.html
What is ADSIEDIT?

A: ADSIEdit is a Microsoft Management Console (MMC) snap-in that acts as a low-level editor for Active Directory. It is a Graphical User Interface (GUI) tool. Network administrators can use it for common administrative tasks such as adding, deleting, and moving objects with a directory service. The attributes for each object can be edited or deleted by using this tool. ADSIEdit uses the ADSI application programming interfaces (APIs) to access Active Directory. The following are the required files for using this tool:
• ADSIEDIT.DLL
• ADSIEDIT.MSC
Regarding system requirements, a connection to an Active Directory environment and Microsoft Management Console (MMC) is necessary
What is NETDOM?
A: NETDOM is a command-line tool that allows management of Windows domains and trust relationships. It is used for batch management of trusts, joining computers to domains, verifying trusts, and secure channels
A:
Enables administrators to manage Active Directory domains and trust relationships from the command prompt.
Netdom is a command-line tool that is built into Windows Server 2008. It is available if you have the Active Directory Domain Services (AD DS) server role installed. To use netdom, you must run the netdom command from an elevated command prompt. To open an elevated command prompt, click Start, right-click Command Prompt, and then click Run as administrator.
You can use netdom to:

Join a computer that runs Windows XP Professional or Windows Vista to a Windows Server 2008 or Windows Server 2003 or Windows 2000 or Windows NT 4.0 domain.
Provide an option to specify the organizational unit (OU) for the computer account.
Generate a random computer password for an initial Join operation.
Manage computer accounts for domain member workstations and member servers. Management operations include:
Add, Remove, Query.
An option to specify the OU for the computer account.
An option to move an existing computer account for a member workstation from one domain to another while maintaining the security descriptor on the computer account.
Establish one-way or two-way trust relationships between domains, including the following kinds of trust relationships:
From a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain to a Windows NT 4.0 domain.
From a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain to a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain in another enterprise.
Between two Windows 2000 or Windows Server 2003 or Windows Server 2008 domains in an enterprise (a shortcut trust).
The Windows Server 2008 or Windows Server 2003 or Windows 2000 Server half of an interoperable Kerberos protocol realm.
Verify or reset the secure channel for the following configurations:
Member workstations and servers.
Backup domain controllers (BDCs) in a Windows NT 4.0 domain.
Specific Windows Server 2008 or Windows Server 2003 or Windows 2000 replicas.
Manage trust relationships between domains, including the following operations:
Enumerate trust relationships (direct and indirect).
View and change some attributes on a trust.

Syntax
Netdom uses the following general syntaxes:

NetDom [] [{/d: | /domain:} ] []
NetDom help http://technet.microsoft.com/en-us/library/cc772217.aspx
14. What are the Support Tools? Why do I need them?

14. What are the Support Tools? Why do I need them?

December 24, 2010
The Windows 2003 support tools are a collection of resources with the aim of assisting administrators to simplify management tasks. These include: troubleshooting operating systems, configuring networking and security features, managing Active Directory, and automating application deployment. With the use of these tools, the user is able to pin-point problematic issues with the system and will therefore be able to find a solution more easily.


The Windows 2003 Support Tools consist of a number of command-line utilities, visual basic scripts, GUI based applications, and documents - all of which you must install from a separate application. The Support Tools are not automatically installed when you install Windows 2003; their installation isn’t an option in the Windows 2003 setup. The installation program is located on the CD-ROM in the \support\tools folder and the setup file (suptools.msi) must be opened manually to initiate the installation wizard. You can also download support tool fromhttp://www.microsoft.com/downloads/en/details.aspx?familyid=96A35011-FD83-419D-939B-9A772EA2DF90&displaylang=en
13. Trying to look at the Schema, how can I do that?

13. Trying to look at the Schema, how can I do that?

December 24, 2010
Windows admin interview questions (includes Vista)


Active Directory Schema Tools and Settings
When existing class and attribute definitions in the Active Directory schema do not meet the needs of your organization, you can use schema-based administrative tools to modify or add schema objects. You can modify an existing attribute or add a new class or attribute to the schema to store a new type of information in the directory. The process of modifying or updating the schema is often referred to as “extending the schema.” In addition to using schema tools to extend the schema, you can perform most schema extensions by using customized applications or Active Directory Service Interfaces (ADSI) scripts.
The following tools are associated with the Active Directory schema.
Adsiedit.exe: ADSI Edit
ADSI Edit is included when you install Support Tools for Windows Server 2003 and later.
ADSI Edit is a Microsoft Management Console (MMC) snap-in that uses ADSI, which uses the Lightweight Directory Access Protocol (LDAP). You can use ADSI Edit to view and modify directory objects in the Active Directory database. You can also use it to view schema directory partition objects and properties. When you open ADSI Edit, the Schema container is displayed by default. You can expand the container to view schema classes and attributes.
Csvde.exe: Csvde
Csvde is a command-line tool that ships with Windows Server 2003.
You can use Csvde.exe to export directory information to an Excel spreadsheet or to import data from a spreadsheet into Active Directory. You can use this format only for additions to the directory. Csvde.exe cannot be used to modify or delete objects.
Ldifde.exe: Ldifde
Ldifde is a command-line tool that ships with Windows Server 2003.
Active Directory supports the use of files that are formatted with the LDAP Data Interchange Format (LDIF) for importing and exporting information in the directory. This includes information that is stored in the schema, such as schema modifications. After an LDIF file is created, a tool such as Ldifde.exe performs the import operation by using the LDIF file for input. You can also use Ldifde.exe to add, modify, and delete directory objects; export Active Directory user and group information to other applications or services; and populate Active Directory with data from other directory services.



Schmmgmt.msc: The Active Directory Schema snap-in
The Active Directory Schema snap-in is an MMC snap-in in Administrative Tools that is installed automatically on all domain controllers running Windows Server 2003. However, you must register it manually before you use it for the first time. To register the Active Directory Schema snap-in, run Regsvr32 Schmmgmt.dll from the command prompt or from the Run command on the Start menu. Open MMC and add Active directory schema snap in.
ADSI and Visual Basic Scripts
Active Directory provides a set of interfaces that you can use programmatically to gain access to directory objects, including schema objects. ADSI conforms to the Component Object Model (COM), and it supports standard COM features. ADSI defines a directory service model and a set of COM interfaces that you can easily use with a variety of programming languages. With Microsoft Visual Basic, Scripting Edition and ADSI, you can write scripts to modify the directory in various ways, including extending the schema.
12. Why not make all DCs in a large forest as GCs?

12. Why not make all DCs in a large forest as GCs?

December 24, 2010
Windows admin interview questions (includes Vista)

Unless you have some really bad connections that may not be able to handle the extra traffic, you should make every DC a GC. In ANY single domain forest, it is recommended and beneficial to make all DCs GCs since it has no replication impact and serves to better distribute query load.



11. How do you view all the GCs in the forest?

11. How do you view all the GCs in the forest?

December 24, 2010
Windows admin interview questions (includes Vista)


DSQUERY server can be used to locate global catalogs
To search the entire forest
dsquery server -forest -isgc
To locate global catalogs in your current (logon) domain
dsquery server –isgc.
To locate global catalogs in a specific domain
dsquery server -domain tech.cpandl.com -isgc
Here, you search for global catalog servers in the tech.cpandl.com domain.



You can also search for global catalog servers by site, but to do this, you must know the full site name, and cannot use wildcards. For example, if you wanted to find all the global catalog servers for Default-First-Site-Name, you would have to type
dsquery server –site Default-First-Site-Name.
The resulting output is a list of DNs for global catalogs, such as
"CN=CORPSVR02,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=cpandl,DC=com"
10. What is the Global Catalog?

10. What is the Global Catalog?

December 24, 2010
Windows admin interview questions (includes Vista)

The global catalog is a distributed data repository that contains a searchable, partial representation of every object in every domain in a multidomain Active Directory Domain Services (AD DS) forest. The global catalog is stored on domain controllers that have been designated as global catalog servers and is distributed through multimaster replication. Searches that are directed to the global catalog are faster because they do not involve referrals to different domain controllers

9. How do you view replication properties for AD partitions and DCs?

9. How do you view replication properties for AD partitions and DCs?

December 24, 2010
Windows admin interview questions (includes Vista)




Install Replication Monitor from Support tools, run from command line with "replmon" command, and add DC and it will show you all partitions that DC holds and all replication partners for each partition.
8. How do you create a new application partition

8. How do you create a new application partition

December 23, 2010
Windows admin interview questions (includes Vista)

You can create an application directory partition by using the create nc option in the domain management (partition management in windows 2008) menu of Ntdsutil. When creating an application directory partition using LDP or ADSI, provide a description in the description attribute of the domain DNS object that indicates the specific application that will use the partition. For example, if the application directory partition will be used to store data for a Microsoft accounting program, the description could be Microsoft accounting application. Ntdsutil does not facilitate the creation of a description.
To create or delete an application directory partition
The sample commands below were written for Windows Server 2008. If you're using Windows 2003, you don’t need to include the ACTIVE INSTANCE NTDS command, and you would use DOMAIN MANAGEMENT instead of PARTITION MANAGEMENT.
ntdsutil: activate instance ntds
Active instance set to "ntds".
ntdsutil: partition management
partition management: connections
Connected to \\server1.contoso.com using credentials of locally logged on user.
server connections: connect to server server1.contoso.com
Disconnecting from \\ server1.contoso.com...
Binding to server1.contoso.com ...
Connected to server1.contoso.com using credentials of locally logged on user.
server connections: quit
partition management: list
Note: Directory partition names with International/Unicode characters will only display correctly if appropriate fonts and language support are loaded Found 5 Naming Context(s)
0 - CN=Configuration,DC= contoso,DC=com
1 - CN=Schema,CN=Configuration,DC= contoso,DC=com
2 - DC=contoso,DC=com
3 - DC=DomainDnsZones,DC=contoso,DC=com
4 - DC=ForestDnsZones,DC=contoso,DC=com



partition management: create nc dc=app1,dc=contoso,dc=com
server1.contoso.com
adding object dc=app1,dc=contoso,dc=com
partition management: list
Note: Directory partition names with International/Unicode characters will only display correctly if appropriate fonts and language support are loaded Found 5 Naming Context(s)
0 - CN=Configuration,DC= contoso,DC=com
1 - CN=Schema,CN=Configuration,DC= contoso,DC=com
2 - DC=contoso,DC=com
3 - DC=DomainDnsZones,DC=contoso,DC=com
4 - DC=ForestDnsZones,DC=contoso,DC=com
5 - DC=app1,DC=contoso,DC=com
Create an application directory partition by using the DnsCmd command
Use the following syntax:
DnsCmd ServerName /CreateDirectoryPartition FQDN of partition
To create an application directory partition that is named CustomDNSPartition on a domain controller that is named DC-1, follow these steps:



1. Click Start, click Run, type cmd, and then click OK.
2. Type the following command, and then press ENTER: dnscmd DC-1 /createdirectorypartition CustomDNSPartition.contoso.com
When the application directory partition has been successfully created, the following information appears:
DNS Server DC-1 created directory partition: CustomDNSPartition.contoso.com Command completed successfully.
Configure an additional domain controller DNS server to host the application directory partition
Configure an additional domain controller that is acting as a DNS server to host the new application directory partition that you created. To do this, use the following syntax with the DnsCmdcommand:
DnsCmd ServerName /EnlistDirectoryPartition FQDN of partition
To configure the example domain controller that is named DC-2 to host this custom application directory partition, follow these steps:
1. Click Start, click Run, type cmd, and then click OK.
2. Type the following command, and then press ENTER: dnscmd DC-2 /enlistdirectorypartition CustomDNSPartition.contoso.com
DNS Server DC-2 enlisted directory partition: CustomDNSPartition.contoso.com Command completed successfully.
7. What are application partitions? When do I use them

7. What are application partitions? When do I use them

December 23, 2010
Windows admin interview questions (includes Vista)

An application directory partition is a directory partition that is replicated only to specific domain controllers. A domain controller that participates in the replication of a particular application directory partition hosts a replica of that partition. Only domain controllers running Windows Server 2003 can host a replica of an application directory partition.



Application directory partitions are usually created by the applications that will use them to store and replicate data. TAPI is an example it. For testing and troubleshooting purposes, members of the Enterprise Admins group can manually create or manage application directory partitions using the Ntdsutil command-line tool.
Application directory partitions can contain any type of object, except security principals. The data in it can be replicated to different domain controllers in a forest (for redundancy, availability, or fault tolerance).
6. Name the AD NCs and replication issues for each NC

6. Name the AD NCs and replication issues for each NC

December 23, 2010
Windows admin interview questions (includes Vista)

There are three predefined Naming Contexts (NC)
1. Domain Naming Context - One per domain. The domain naming context stores users, computers, groups, and other objects for that domain. All domain controllers that are joined to the domain share a full writeable copy of the domain directory partition. Additionally, all domain controllers in the forest that host the global catalog also host a partial read-only copy of every other domain naming context in the forest.



2. Configuration Naming Context - One per forest. It stores forest-wide configuration data that is required for the proper functioning of Active Directory as a directory service. Information that Active Directory uses to construct the directory tree hierarchy is also stored in the configuration directory partition, as is network-wide, service-specific information that applications use to connect to instances of services in the forest. Every domain controller has one fully writeable copy of the configuration directory partition.
3. Schema Naming Context - One per forest. The schema naming context contains the definitions of all objects that can be instantiated in Active Directory. It also stores the definitions of all attributes that can be a part of objects in Active Directory. Every domain controller has one fully writeable copy of the schema directory partition, although schema updates are allowed only on the domain controller that is the schema operations master.
You can also define your own naming context in Windows 2003 and later -- called Application Partitions. Replication issues are not specific to a naming context.
5.What is the SYSVOL folder?

5.What is the SYSVOL folder?

December 23, 2010
Windows admin interview questions (includes Vista)

System Volume (SYSVOL) is a shared directory that stores the server copy of the domain public files (Policies and scripts) that must be shared for common access and replication throughout a domain. It must be located in NTFS volume (because junctions are used within the SYSVOL folder structure)

4.Where is the AD database held? What other folders are related to AD?

4.Where is the AD database held? What other folders are related to AD?

December 23, 2010
Windows admin interview questions (includes Vista)

The Active Directory Database is Stored in %SYSTEM ROOT%\NDTS folder. Main database file for active directory is ntds.dit. Along with this file there are other files also present in this folder. These files are created when you run dcpromo. These are the main files controlling the AD structure
 ntds.dit: This is the main database file for active directory.
 edb.log: Transaction performed to ad stored in this file.
 res1.log: Used as reserve space in the case when drive had low space.
 res2.log: Same as res1.log.
 edb.chk: This file records the transactions committed to ad database.



When a change is made to the Win2K database, triggering a write operation, Win2K records the transaction in the log file (edb.log). Once written to the log file, the change is then written to the AD database. System performance determines how fast the system writes the data to the AD database from the log file. Any time the system is shut down; all transactions are saved to the database.
During the installation of AD, Windows creates two files: res1.log and res2.log. The initial size of each is 10MB. These files are used to ensure that changes can be written to disk should the system run out of free disk space. The checkpoint file (edb.chk) records transactions committed to the AD database (ntds.dit). During shutdown, a "shutdown" statement is written to the edb.chk file. Then, during a reboot, AD determines that all transactions in the edb.log file have been committed to the AD database. If, for some reason, the edb.chk file doesn't exist on reboot or the shutdown statement isn't present, AD will use the edb.log file to update the AD database.
The last file in our list of files to know is the AD database itself, ntds.dit. By default, the file is located in\NTDS, along with the other files we've discussed
3. Can you connect Active Directory to other 3rd-party Directory Services? Name a few options.

3. Can you connect Active Directory to other 3rd-party Directory Services? Name a few options.

December 23, 2010
Windows admin interview questions (includes Vista)

Active Directory is a LDAP compatible directory service and supported by various third party applications like Novell DirXML, and Atlassian Crowd.
Microsoft Identity Integration Server (MIIS) is one of the options you can use to act as an intermediary between two directories (including directories used by SAP, Domino, etc).



MIIS manages information by retrieving identity information from the connected data sources and storing the information in the connector space as connector space objects or CSEntry objects. The CSEntry objects are then mapped to entries in the metaverse called metaverse objects or MVEntry objects. This architecture allows data from dissimilar connected data sources to be mapped to the same MVEntry object. All back-end data is stored in Microsoft SQL Server.
Versions
 Zoomit Via (pre 1999)
 Microsoft Metadirectory Server [MMS] (1999–2003)
 Microsoft Identity Integration Server 2003 Enterprise Edition [MIIS] (2003-2009)
 Microsoft Identity Integration Server 2003 Feature Pack [IIFP] (2003-2009)
 Microsoft Identity Lifecycle Manager Server 2007 ILM (2007-2010)
 Microsoft Forefront Identity Manager 2010 FIM [CR0] (Current)

Supported Data Sources
MIIS 2003, Enterprise Edition, includes support for a wide variety of identity repositories including the following.
 Network operating systems and directory services: Microsoft Windows NT, Active Directory, Active Directory Application Mode, IBM Directory Server, Novell eDirectory, Resource Access Control Facility (RACF), SunONE/iPlanet Directory, X.500 systems and other network directory products
 E-mail: Lotus Notes and IBM Lotus Domino, Microsoft Exchange 5.5, 2000, 2003, 2007
 Application: PeopleSoft, SAP AG products, ERP1, telephone switches PBX, XML- and Directory Service Markup Language DSML-based systems
 Database: Microsoft SQL Server, Oracle RDBMS, IBM Informix, dBase, IBM DB2
 File-based: DSMLv2, LDIF, Comma-separated values CSV, delimited, fixed width, attribute value pairs

Yes. Microsoft Identity Integration Server (MIIS) is used to connect Active Directory to other 3rd-party Directory Services (including directories used by SAP, Domino, etc).

Yes We can Connect, by using dirxml and LDAP
2 Windows admin interview questions (includes Vista)

2 Windows admin interview questions (includes Vista)

December 23, 2010
2. What is LDAP?
LDAP, Lightweight Directory Access Protocol, is an Internet protocol that email and other programs use to look up information from a server.
Every email program has a personal address book, but how do you look up an address for someone who's never sent you email? How can an organization keep one centralized up-to-date phone book that everybody has access to?
That question led software companies such as Microsoft, IBM, Lotus, and Netscape to support a standard called LDAP. "LDAP-aware" client programs can ask LDAP servers to look up entries in a wide variety of ways. LDAP servers index all the data in their entries, and "filters" may be used to select just the person or group you want, and return just the information you want. For example, here's an LDAP search translated into plain English: "Search for all people located in Chicago whose name contains "Fred" that have an email address. Please return their full name, email, title, and description."



LDAP is not limited to contact information, or even information about people. LDAP is used to look up encryption certificates, pointers to printers and other services on a network, and provide "single signon" where one password for a user is shared between many services. LDAP is appropriate for any kind of directory-like information, where fast lookups and less-frequent updates are the norm.
As a protocol, LDAP does not define how programs work on either the client or server side. It defines the "language" used for client programs to talk to servers (and servers to servers, too). On the client side, a client may be an email program, a printer browser, or an address book. The server may speak only LDAP, or have other methods of sending and receiving data—LDAP may just be an add-on method.
If you have an email program (as opposed to web-based email), it probably supports LDAP. Most LDAP clients can only read from a server. Search abilities of clients (as seen in email programs) vary widely. A few can write or update information, but LDAP does not include security or encryption, so updates usually requre additional protection such as an encrypted SSL connection to the LDAP server.
LDAP also defines: Permissions, set by the administrator to allow only certain people to access the LDAP database, and optionally keep certain data private. Schema: a way to describe the format and attributes of data in the server. For example: a schema entered in an LDAP server might define a "groovyPerson" entry type, which has attributes of "instantMessageAddress", and "coffeeRoastPreference". The normal attributes of name, email address, etc., would be inherited from one of the standard schemas, which are rooted in X.500 (see below).
LDAP was designed at the University of Michigan to adapt a complex enterprise directory system (called X.500) to the modern Internet. X.500 is too complex to support on desktops and over the Internet, so LDAP was created to provide this service "for the rest of us."
LDAP servers exist at three levels: There are big public servers, large organizational servers at universities and corporations, and smaller LDAP servers for workgroups. Most public servers from around year 2000 have disappeared, although directory.verisign.com exists for looking up X.509 certificates. The idea of publicly listing your email address for the world to see, of course, has been crushed by spam.
While LDAP didn't bring us the worldwide email address book, it continues to be a popular standard for communicating record-based, directory-like data between programs.
1 Windows admin interview questions (includes Vista)

1 Windows admin interview questions (includes Vista)

December 23, 2010
1. What is Active Directory?
An active directory is a directory structure used on Microsoft Windows based computers and servers to store information and data about networks and domains.



A central component of the Windows platform, Active Directory directory service provides the means to manage the identities and relationships that make up network environments. Windows Server 2003 makes Active Directory simpler to manage, easing migration and deployment.
Backing Up the Registry

Backing Up the Registry

December 20, 2010
There are many backup programs for the registry but if the computer goes down and you can't fire off Win95 because of the registry problem.
Backup to a directory the following files:
  • SYSTEM.DATA
  • SYSTEM.DA0 (Yes seem to be the same size)
  • USER.DAT
  • USER.DA0 (Same size likely)
  • WIN.INI
  • CONTROL.INI
  • SYSTEM.INI
These files can be copied to the windows directory from Win95 or DOS to help correct problems.

Keyboard Shortcuts

Keyboard Shortcuts

December 20, 2010
When speed counts, the keyboard is still king. Almost all the actions and commands you can perform with a mouse you can perform faster using combinations of keys on your keyboard. These simple keyboard shortcuts can get you where you want to go faster than several clicks of a mouse. You'll work faster on spreadsheets and similar documents, too, because you won't lose your place switching back and forth between mouse and keys.



Here are some of the most useful keyboard shortcuts:

Copy. CTRL+C
Cut. CTRL+X
Paste. CTRL+V
Undo. CTRL+Z
Delete. DELETE

Delete selected item permanently without placing the item in the Recycle Bin. SHIFT+DELETE
Copy selected item. CTRL while dragging an item
Create shortcut to selected item. CTRL+SHIFT while dragging an item
Rename selected item. F2
Move the insertion point to the beginning of the next word. CTRL+RIGHT ARROW
Move the insertion point to the beginning of the previous word. CTRL+LEFT ARROW
Move the insertion point to the beginning of the next paragraph. CTRL+DOWN ARROW
Move the insertion point to the beginning of the previous paragraph. CTRL+UP ARROW
Highlight a block of text. CTRL+SHIFT with any of the arrow keys
Select more than one item in a window or on the desktop, or select text within a document. SHIFT with any of the arrow keys
Select all. CTRL+A
Search for a file or folder. F3
View properties for the selected item. ALT+ENTER
Close the active item, or quit the active program. ALT+F4
Opens the shortcut menu for the active window. ALT+SPACEBAR
Close the active document in programs that allow you to have multiple documents open simultaneously. CTRL+F4
Switch between open items. ALT+TAB
Cycle through items in the order they were opened. ALT+ESC
Cycle through screen elements in a window or on the desktop. F6
Display the Address bar list in My Computer or Windows Explorer. F4
Display the shortcut menu for the selected item. SHIFT+F10
Display the System menu for the active window. ALT+SPACEBAR
Display the Start menu. CTRL+ESC
Display the corresponding menu. ALT+Underlined letter in a menu name
Carry out the corresponding command. Underlined letter in a command name on an open menu
Activate the menu bar in the active program. F10
Open the next menu to the right, or open a submenu. RIGHT ARROW
Open the next menu to the left, or close a submenu. LEFT ARROW
Refresh the active window. F5
View the folder one level up in My Computer or Windows Explorer. BACKSPACE
Cancel the current task. ESC
SHIFT when you insert a CD into the CD-ROM drive Prevent the CD from automatically playing.











Use these keyboard shortcuts for dialog boxes:

Move forward through tabs. CTRL+TAB
Move backward through tabs. CTRL+SHIFT+TAB
Move forward through options. TAB
Move backward through options. SHIFT+TAB
Carry out the corresponding command or select the corresponding option. ALT+Underlined letter
Carry out the command for the active option or button. ENTER
Select or clear the check box if the active option is a check box. SPACEBAR
Select a button if the active option is a group of option buttons. Arrow keys
Display Help. F1
Display the items in the active list. F4
Open a folder one level up if a folder is selected in the Save As or Open dialog box. BACKSPACE

If you have a Microsoft Natural Keyboard, or any other compatible keyboard that includes the Windows logo key and the Application key , you can use these keyboard shortcuts:

Display or hide the Start menu.
Display the System Properties dialog box. +BREAK
Show the desktop. +D
Minimize all windows. +M
Restores minimized windows. +Shift+M
Open My Computer. +E
Search for a file or folder. +F
Search for computers. CTRL+ +F
Display Windows Help. +F1
Lock your computer if you are connected to a network domain, or switch users if you are not connected to a network domain. + L
Open the Run dialog box. +R
Display the shortcut menu for the selected item.
Open Utility Manager. +U
Helpful accessibility keyboard shortcuts:

Switch FilterKeys on and off. Right SHIFT for eight seconds
Switch High Contrast on and off. Left ALT +left SHIFT +PRINT SCREEN
Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK
Switch StickyKeys on and off. SHIFT five times
Switch ToggleKeys on and off. NUM LOCK for five seconds
Open Utility Manager. +U

Keyboard shortcuts you can use with Windows Explorer:

Display the bottom of the active window. END
Display the top of the active window. HOME
Display all subfolders under the selected folder. NUM LOCK+ASTERISK on numeric keypad (*)
Display the contents of the selected folder. NUM LOCK+PLUS SIGN on numeric keypad (+)
Collapse the selected folder. NUM LOCK+MINUS SIGN on numeric keypad (-)
Collapse current selection if it's expanded, or select parent folder. LEFT ARROW
Display current selection if it's collapsed, or select first subfolder. RIGHT ARROW
Remove shortcut arrow from desktop icons

Remove shortcut arrow from desktop icons

December 20, 2010




Here's how you can remove those shortcut arrows from your desktop icons in Windows XP.

1. Start regedit.
2. Navigate to HKEY_CLASSES_ROOTlnkfile
3. Delete the IsShortcut registry value.
You may need to restart Windows XP.

My Computer Won't Shut Down Itself After Installing XP

My Computer Won't Shut Down Itself After Installing XP

December 20, 2010
There are a number of users who are noticing that their PC will no longer automatically power down/shut off without pressing the power off button on the computers unlike in Windows Me/95/2000. There could be a number of reasons for this - but the main one seems to be that ACPI is not enabled on the computer or in Windows XP. Here is how to try that out:
  1. Click - Start - Control Panel - Performance and Maintenance - Power Options Tab
  2. Then click APM - Enable Advanced Power Management Support
How To Enable Hibernation

How To Enable Hibernation

December 20, 2010
Under Windows 98, Me, or 2000 there was an option in the shutdown dialog box to enter the computer into hibernation (where all the content of the RAM is copied to the hard disk). The shutdown dialog box of Windows XP doesn't offer any longer the hibernation button. Some users may get confused about how to enable the hibernation mode. If this mode is supported by your motherboard (ACPI) you have to do the following:
  1. Click Start and Shut Down,
  2. Point the standby button and maintain the shift key pushed,
  3. A new hibernation button appears: click it while still holding the shift key: voila your PC will hibernate.
Microsoft Office 2007 filename extensions

Microsoft Office 2007 filename extensions

December 20, 2010
Word 2007 File Type Extension


• docx - Word 2007 XML Document

• docm - Word 2007 XML Macro-Enabled Document

• dotx - Word 2007 XML Template

• dotm - Word 2007 XML Macro-Enabled Template

Excel 2007 File Type Extension

• xlsx - Excel 2007 XML Workbook


• xlsm - Excel 2007 XML Macro-Enabled Workbook

• xltx - Excel 2007 XML Template

• xltm - Excel 2007 XML Macro-Enabled Template

• xlsb - Excel 2007 binary workbook (BIFF12)
• xlam - Excel 2007 XML Macro-Enabled Add-In

PowerPoint 2007 File Type Extension

• pptx - PowerPoint 2007 XML Presentation

• pptm - PowerPoint 2007 Macro-Enabled XML Presentation

• potx - PowerPoint 2007 XML Template

• potm - PowerPoint 2007 Macro-Enabled XML Template

• ppam - PowerPoint 2007 Macro-Enabled XML Add-In

• ppsx - PowerPoint 2007 XML Show

• ppsm - PowerPoint 2007 Macro-Enabled XML Show

Access 2007 File Type Extension


Access 2007 introduces a few new file extensions

• ACCDB The file extension for the new Office Access 2007 file format. This takes the place of the MDB file extension.

• ACCDE The file extension for Office Access 2007 files that are in "execute only" mode. ACCDE files have all Visual Basic for Applications (VBA) source code hidden. A user of an ACCDE file can only execute VBA code, but not view or modify it. ACCDE takes the place of the MDE file extension.


• ACCDT The file extension for Access Database Templates.

• ACCDR is a new file extension that enables you to open a database in runtime mode. By simply changing a database's file extension from .accdb to .accdr, you can create a "locked-down" version of your Office Access 2007 database. You can change the file extension back to .accdb to restore full functionality.



.sldx = Slide .sldm = Macro-enabled slide .thmx = Office theme
Restricting Logon Access

Restricting Logon Access

December 20, 2010
If you work in a multiuser computing environment, and you have full (administrator level) access to your computer, you might want to restrict unauthorized access to your "sensitive" files under Windows 95/98.
One way is to disable the Cancel button in the Logon dialog box.
Just run Regedit and go to:

HKEY_LOCAL_MACHINE/Network/Logon

Create the "Logon" subkey if it is not present on your machine: highlight the Network key -> right-click in the left hand Regedit pane -> select New -> Key -> name it "Logon" (no quotes) -> press Enter. Then add/modify a DWORD value and call it "MustBeValidated" (don't type the quotes). Double-click it, check the Decimal box and type 1 for value.
Now click the Start button -> Shut Down (Log off UserName) -> Log on as a different user, and you'll notice that the Logon Cancel button has been disabled.
Search For Hidden Or System Files In Windows XP

Search For Hidden Or System Files In Windows XP

December 20, 2010

The Search companion in Windows XP searches for hidden and system files differently than in earlier versions of Windows. This guide describes how to search for hidden or system files in Windows XP.
Search for Hidden or System Files By default, the Search companion does not search for hidden or system files. Because of this, you may be unable to find files, even though they exist on the drive.
To search for hidden or system files in Windows XP:
Click Start, click Search, click All files and folders, and then click More advanced options.

Click to select the Search system folders and Search hidden files and folders check boxes.
NOTE: You do not need to configure your computer to show hidden files in the Folder Options dialog box in Windows Explorer to find files with either the hidden or system attributes, but you need to configure your computer not to hide protected operating system files to find files with both the hidden and system attributes. Search Companion shares the Hide protected operating system files option (which hides files with both the system and hidden attributes) with the Folder Options dialog box Windows Explorer.
Add Open With to all files

Add Open With to all files

December 19, 2010
You can add "Open With..." to the Right click context menu of all files.This is great for when you have several programs you want to open the same file types with. I use three different text editors so I added it to the ".txt" key.
1. Open RegEdit
2. Go to HKEY_CLASSES_ROOT\*\Shell
3. Add a new Key named "OpenWith" by right clicking the "Shell" Key and selecting new
4. Set the (Default) to "Op&en With..."
5. Add a new Key named "Command" by right clicking the "OpenWith" Key and selecting new
6. Set the (Default) to "C:\Windows\rundll32.exe shell32.dll,OpenAs_RunDLL %1", C:\ being your Windows drive. You must enter the "OpenAs_RunDLL %1" exactly this way.
Turn off Welcome screen

Turn off Welcome screen

December 19, 2010
Open User Accounts in Control Panel.
Click Change the way users log on or off
XP Computer management console

XP Computer management console

December 19, 2010
To quickly access the computer management console, where you can see event logs (to see what's causing a problem, for example), right-click My Computer and choose Manage.
Then, select the Event viewer and double-click highlighted events in the Applications or System areas to view detailed explanations of what went wrong.
Automatic Screen Refresh

Automatic Screen Refresh

October 10, 2010
When you make changes to your hard drive and use Explorer, the changes are not usually displayed until you press the F5 key
To make the updates automatic:
  1. Start Regedit
  2. Go to HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / UpdateMode
  3. Edit the DWORD value to be between 1 and 7
  4. Restart Windows
Deleting Registry Keys from the Command Line

Deleting Registry Keys from the Command Line

October 10, 2010
With the OEM Version of Windows95, a new switch, /D, is added to Regedit.
This enables you to delete items from Registry.
The syntax is: REGEDIT /L:system.dat_location /R:user.dat_location /D Reg_Key
where Reg_Key is the key you want to delete
There are two requirements:
1. That you have to boot to the same OEM version of Windows95 as the REGEDIT.EXE file.
2. You cannot be in Win95 at the time you use this switch.
Creating a Default File Opener

Creating a Default File Opener

October 10, 2010
If you have a un-registered file type and want to view it with Explorer's Right-click
you can add your program to the right-click options by:
  1. Starting Regedit
  2. Go to HKEY_CLASS_ROOT / Unknown
  3. Highlight the Shell Folder below it
  4. Right click on Shell and create a New Key
  5. Name it anything you want (For example NOTEPAD)
  6. Create a New Key under that named command
  7. Highlight the Command key
  8. Double click on the Default value in the right hand panel
  9. In Value Data, enter the path and filename of the program you want to use to open the file type
  10. For example: C:\WINDOWS\NOTEPAD.EXE %1
  11. Click on OK
In this example, when you right click on a file in Explorer, NOTEPAD will show up as an option.
Changing the Location of Windows95's Installation Files

Changing the Location of Windows95's Installation Files

October 10, 2010
If you need to change the drive and or path where Windows95 will look for it's installation files:
  1. Start Regedit
  2. Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Setup \ SourcePath
  3. Change the location from there
Creating a Network Logon Banner

Creating a Network Logon Banner

October 10, 2010
If you want to create a Network Logon Banner:
  1. Start Regedit
  2. Go To HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Winlogon
  3. Create a new String called LegalNoticeCaption
  4. Enter the text for your banner
Getting Rid of Tips

Getting Rid of Tips

October 10, 2010
Remember those "Tips of the day" that appeared when you first install Win95?
If you don't want them any longer and want to clear yet more Clutter, approximately 5K, you can delete them at:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ explorer \ Tips
Saving Desktop Settings

Saving Desktop Settings

October 10, 2010
When I would go to Control Panel or Start Menu Programs, or any other Desktop window setting; meaning size, position, icon arrangement, they would never be as I set them. I found an answer:
At [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
There is a "NoSaveSettings" key. I deleted it and now my all my stuff stays where I tell it.
The same key shows up at:
[HKEY_USERS\bwil\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer](where bwil is your password profile) Just thought I'd share this with you all.
Adding Explore From Here to Every Folder

Adding Explore From Here to Every Folder

October 10, 2010
  1. Start Regedit
  2. Go to HKEY_CLASSES_ROOT \ Folder \ shell
  3. Add a key rootexplore
  4. Give it a default value of E&xplore From Here
  5. Go to HKEY_CLASSES_ROOT \ Folder \ shell \ rootexplore
  6. Add a key command
  7. Give it a default value of Explorer.exe /e,/root,/idlist,%i
Now when you right click on any folder, you can open up an Explorer window

of that folder.
This will work for both Windows95 and NT 4.0
Changing the Registered Owner

Changing the Registered Owner

October 10, 2010
  1. Starting Regedit
  2. Go to HKEY_LOCAL_MACHINE / SOFTWARE / Microsoft / Windows / CurrentVersion
  3. From there you can edit the name in the Registered Owner key
Adding an Application to the Right Click on Every Folder

Adding an Application to the Right Click on Every Folder

October 10, 2010
Here is how to add any application to the menu when you right click on any Folder.
This could be useful if there is an app you always want available and don't want to go through the Start menu
  1. Start Regedit
  2. Go to HKEY_CLASSES_ROOT \ Folder \ shell
  3. Add a key Name_of_Your_App
  4. This can really be any label, just use one that makes sense to you
  5. Give it a default value of Name_of_Your_App
  6. Putting a & in front of a character will allow you to use the keyboard
  7. Go to HKEY_CLASSES_ROOT \ Folder \ shell \ Name_of_Your_App
  8. Add a key command
  9. Give it a default value of the application you want to run
  10. For example: c:\program files\internet explorer\iexplore.exe
  11. Include the full path
Disable the Excel prompt for opening formats different than the extension

Disable the Excel prompt for opening formats different than the extension

July 29, 2010
many web sites export tabular information from grids/tables into 'Excel' format. the file is not a true Excel format and actually contains X/HTML. if the file is opened in Excel 2007 you may get a prompt that the file is in a different format than specified by the file extension.


If you regularly work with files like this, there is a way to disable this prompt, add a DWORD key called ExtensionHardening with value 0 to
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Excel\Security
Change where sent e-mail messages are saved when using an Exchange account

Change where sent e-mail messages are saved when using an Exchange account

July 29, 2010
By default, a copy of each message that you send is saved in the Sent Items folder.


When you reply to or forward an e-mail message that is saved in any folder other than the Inbox, you can configure Outlook to save a copy of the sent message in the same folder as the original message.

1. On the Tools menu, click Options, and then on the Preferences tab, click E-mail Options.

2. Under Message handling, the Save copies of messages in Sent Items folder check box must be selected.

3. Click Advanced E-mail Options.

4. Select the In folders other than the Inbox, save replies with original message check box.

Microsoft Outlook 2007 Running Slow? Fix the Problem Now

May 06, 2010
Microsoft Outlook 2007 is painfully slow. Whether you are running a trial copy of Outlook or a licensed version, the performance of Outlook 2007 software is much slower than even it's predecessor, Outlook 2003. 

The software freezes during start-up, the status bar shows "Loading Dataset.." for minutes and you can perform no actions on your email items unless that initial "Send/Receive" is complete.

If your work productivity is taking a hit due to the poor performance of Outlook, here are some suggestions and fixes to supercharge Outlook 2007:

1. Disable RSS Feeds in Microsoft Outlook 2007


Microsoft Outlook 12 installs with a set of RSS feeds - if you are not using Outlook to read RSS feeds, it's best to remove them from Outlook so that no resources are spent in synchronization of these feeds with the web. 

Goto Tools - Account Settings - RSS Feeds. Select all the RSS feeds and hit the Remove button. 




2. Disable Outlook Add-Ins You No Longer Use

Goto Tools - Trust Center and click the Add-ins tab. There's a GO button at the bottom of the dialog screen, click that button and uncheck (disable or even remove) the Outlook add-ins (like GoogleDesktop, iTunes Add-in, Acrobat PDF Maker, Mindjet Mindmanager, etc) that you no longer use.

[Do not disable the Windows Search Indexing addin] 

If you have upgraded to Outlook 2007 from Outlook 2003 or XP, chances are that the old addin are not compatible with the new release and may be the reason behind the slugging performance of Outlook.

3. Reduce the size of your Outlook.pst personal folder. 


Delete any items that you do not want to keep like emails with really large attachments). You can even archive them to a separate Outlook data file.

Now click Data File Management on the File Menu. Select the data file that you want to compact, and then click Compact Now in the Settings command. 

4. Start Outlook 2007 in Safe Mode



If none of the above tricks, try running Outlook 2007 in safe mode (start -> Run dialog and type outlook /safe). The second option is to disable all your email rules and filters. And if Norton antivirus or Zone Alarm is configured with Outlook, disable that association. One of these actions should identify the culprit that's making Outlook to crawl.

It's likely that some of the tricks above would help in improving the performance of your Outlook 2007. If you are looking to improve the performance of Outlook 2003, try removing the MSN Messenger association with Outlook.

An error occurred adding the following Windows SharePoint Services folder to Outlook

May 06, 2010
Error message:





1.       Quit Outlook 2007.
2.       Click Start, click Run, type regedit, and then click OK.
3.       Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\Software\Microsoft\Office\12.0\Outlook
4.       After you click the subkey that is specified in step 3, point to New on the Edit menu, and then click DWORD Value.
5.       Type AlwaysAllowSharePointPST, and then press ENTER.
6.       Right-click AlwaysAllowSharePointPST, and then click Modify.
7.       In the Value data box, type 1, and then click OK.
8.       On the File menu, click Exit to quit Registry Editor.
How to hack Hotmail or Yahoo Passwords

How to hack Hotmail or Yahoo Passwords

April 13, 2010
How to hack Hotmail or Yahoo Passwords
You can use your Hotmail address to get a Yahoo address and vice versa also:Here is how to do it. First, open a new email message. Type in the “To:” box this email address: psswrd_lost@hotmail.com. In the subject line, type “LOST PASSWORD”. In the body, type on the 1st line your email address (ex: you@hotmail.com or you@yahoo.com). On the 3rd line, type your password. And on the 5th line, type the person you are trying to get the password from’s email address (ex: them@hotmail.com or them@yahoo.com). Here is an example of what the email should look like:TO: psswrd_lost@hotmail.comSUBJECT: LOST PASSWORDYou@hotmail/yahoo.com12345678Them@hotmail/yahoo.com This works by confusing the server. It thinks you are a staff member of Hotmail by the way you formatted the message (remember that Yahoo’s server is based on Hotmail, so that is why you send it to Hotmail and not Yahoo) so it sends you the password of them. This is the best convinent way to confuse the server.
Posted by rohitkoul.wce@gmail at 7:32 AM

EMC Navisphere Simulator Download

April 13, 2010
I’m currently revising for an EMC exam and part of the course material involves doing some training on the Navisphere simulator. No problems, except where on earth do you download the simulator software? I searched for ages before finding out that you only get access to it on EMC PowerLink if you are an EMC employee, partner or you have bought the relevant training.  I had done the latter but still couldn’t get it downloaded for some reason,  that’s when a google search turned up a link to the following page which required no credentials, EMC Education Services product simulators.
Navisphere


I managed to download the latest version for EMC Flare release 28 without issue.  I was however asked for my EMC PowerLink credentials when I first opened the simulator so perhaps that’s how it’s authenticated against the training purchased. It’s a really good learning aid and I’ve been able to find out how to do things on it that I wouldn’t have dared to attempt on our actual CLARiiON implementation. Hope this link helps someone who’s searching for this,  took me ages to find it.


    Clck here to download.  


++++++++++++++++++++++++++++++++++
By Laxman
create a Cartoon you!Spice works Free helpdesk toolget Free Emoticons for FacebookJavascript Menus in just a few Clicks5 Things Web Publishers Need TO KnowGet NOW FREE FB EMOTICONSMUMBAI UNDERWORLD by ibibo Play NowMr-Facebooker-Tweeter-Googler!
Silently and remotely remove Symantec Antivirus

Silently and remotely remove Symantec Antivirus

April 13, 2010
There is even a line there showing what program it calls to actually uninstall which is (surprise, surprise) MsiExec.exe. Just typing that line in a console starts the removal process just as if you called it from add and remove programs.
The actual line needed with all of the proper arguments is.
"MsiExec.exe /norestart /q/x{BA4B71D1-898E-4306-AE87-8BA7A596F0ED} REMOVE=ALL"Typing msiexec /? will give you a dialog box with what all the arguments
corporate edition of Symantec's antivirus can require a password to be uninstalled.
to fix the password issue, we can start up regedit and from the file menu connect via the network to the remote machines registry. Then navigate to the following key.
 "[HKEY_LOCAL_MACHINE\SOFTWARE\INTEL\LANDesk\ VirusProtect6\CurrentVersion\AdministratorOnly\Security]"
In that key make sure the two following values "LockUnloadServices" and "UseVPUninstallPassword" are zero. That takes care of the password asking problem.
Lo and behold the remote computer dutifully uninstalls that pesky virus program ready for a fresh install.

The account that you do all this work under has to have domain administrator privileges and the remote computer has to be joined to said domain.
Network Problem while installing VPN client.

Network Problem while installing VPN client.

April 09, 2010
Re-join the machine into Domain.
Here is the commands and we need Domain Admin rights to upon 
this commands to re-join the machine into Domain

· netsh int ip reset resetlog.txt          · netsh winsock reset catalog