Starting an X-Window application from telnet
start an X-Window server on the PC, such as exceed
export DISPLAY=W.X.Y.Z:0.0 <---W.X.Y.Z is the IP Address of the PC
/opt/ignite/bin/ignite <---Now just run the program
Configuring an HP 700/96 Terminal for a server connection:
start an X-Window server on the PC, such as exceed
export DISPLAY=W.X.Y.Z:0.0 <---W.X.Y.Z is the IP Address of the PC
/opt/ignite/bin/ignite <---Now just run the program
Configuring an HP 700/96 Terminal for a server connection:
- Terminal Ports
- Port 1
- Datacommunications
- 25 Pin - use this to connect to the N class server with a 25 pin to 9 pin cable
- Port 2 - used to connect to an external peripheral
- Parallel
- 25 Pin
- Port 3
- Datacommunications
- 9 Pin - use this port to connect to the A class server with a 9 pin to 25 pin cable
- Terminal Configuration Settings
- Press User/System function key
- modes
- Remote Mode must have an asterisk in it's box (indicating it is selected)
- config keys
- datacomm config
- baud rate 9600
- parity: none/8
- xon/xoff
- terminal config
- serial (2)/parallel(1) - 25 pin console port
- serial (1)/parallel(1) - 9 pin console port
- Term ID - vt100
- Term Mode - em100
- ansi config
- em100
- backspace/del
Page 10
Find HP-UX Overview and Command Summary All pages
No comments